Top iPhone 8 Screen Repair Tips that Professionals Follow

 


So, you have got the iPhone 8 and it suddenly underwent damage. What did you notice? Is there a problem with the front display panel of the phone? 

If you notice a problem with the display panel, make sure you follow the guidelines we have tried to put together. Although we will suggest seeking professional iPhone repair services in Nottingham, you can still try the following tips to bring it back to its normal state. 

Step 1

  • First switch off the power button. Now, use the pentalobe screwdriver for removing the two screws at the bottom of your iPhone. 

Step 2

  • Use a suction cup for lifting the screen.

Step 3

  • Open the iPhone screen. 
  • Remove the Philips screws securing the display connector shield. 
  • Never mix up the screws as they are of different sizes and dimensions. Misplacing them can lead to messing up of the whole repair scene. 

Step 4

  • Remove the cables very carefully. If you are using the spduger make sure you are using its flat end. Now, carefully dislodge the cable connector of the home button. 

Step 5

  • Use the same flat end of the spduger to loosen up the connector of the front camera. 

Step 6 

  • Use the spduger to disconnect a digitizer cable connector. Eliminate the screen assembly from the phone’s rear case. 

Step 7

  • Use the Philips screw driver for removing the three screws at the earpiece speaker, and the front facing camera bracket. 
  • Lift up the front facing camera out of the plastic bracket. 
  • Hold up the front facing camera and then remove the earpiece speaker. 

Step 8

  • Use the spudger and lift the right side of the camera (front facing camera) alongside the sensor cable for unveiling the sensor cable. Never remove the entire cable. Let the microphone still stay connected to the display panel. 
  • Carefully lift the microphone side of the cable. 
  • Now carefully remove the entire sensor cable. 

Step 9

  • Remove the screws which secure the LCD shield plate. 

Step 10

  • Use the flat end of the spudger for carefully loosening up the home button’s connector cable. Push up the connector to disconnect the home button. 

Step 11

  • As you use the flat end of the spudger for gently lifting the home button cable make sure you have separated it from the phone’s display panel. 
  • Push up the home button to dislodge it from the front panel display. 

step 12

  • Take off the protective plastic shield right from the rear part of the front panel display. 
  • Remove a protective covering next to the earpiece mesh. 

Step 13

  • Hold up the display cable and put the LCD shield at the top of it. 
  • Place the home button in its designated hole and allow it to connect with the display shield cable. 

Step 14

  • Replace the screws of the field plate. 

Step 15

  • Set the bracket of the home button. Now replace the two screws securing it. 

Step 16

  • Set up the microphone cable on iPhone 8 display panel. The small protrusion will fit into the hole of the microphone cable. 
  • Now, fit in the proximity sensor to the recess of the front panel. 

Step 17

  • Hold up the front facing camera and fit in the earpiece speaker. 
  • Fit in the front facing camera. 

Step 18

  • Place the earpiece speaker and the front facing camera. 
  • Replace the earlier screws which are taken out from the bracket 

Step 19

  • Make sure you have placed the front facing camera cable amidst the two display cables. 

Step 20

  • Connect all the four cables into their respective sockets. Push the connectors so that they are in place. 

Step 21

  • Set a connector shield in position and replace the screws that were taken out earlier to hold the connector. 

Step 22

  • Now, one by one put the parts in place and try closing the iPhone. Fit the lip of the phone’s front display panel into its rear case. 

Step 23

  • Start closing the front display by firmly pressing the sides of the display along the edges of the phone. The display must fairly go in. 

Step 24

  • Replace the pentalobe screws right next to the lightning port. 

Step 25

  • Pull off the film on the display. 
  • Turn on the iPhone and find out if the phone is working as expected. 

Since the steps are quite methodical, we assume that you might want to step back from a DIY decision and instead seek iPhone screen repair services in Nottingham.

Comments

Popular posts from this blog

What are the Signs that Say Your Samsung Screen Needs replacement?

Fallout of Moisture or Water Damage - Signs That Your Mobile Needs Repair

Mistakes That Increase The Need For Frequent Android Phone Repairs